Your location:
> Product detail
Solid-liquid integrated density meter

Product description:

Shanghai Shuju multifunctional electronic density meter is used to test rubber, plastic, wire and cable, food, composite materials, cosmetics, films, cables, glass industry, liquids, additives, new materials research laboratories

Solid mode: According to ASTM D297-93, D792-00, D618, D891, GB/T1033, JISK6530, ISO2781 standards. Adopt the buoyancy method based on Kimid's principle to accurately and directly read the measured values.

Liquid mode: According to GB/T5526, 13531, 15223, JIS, ISO specifications. The buoyancy method based on Archimedes principle is used to quickly and directly read the density value, relative density value, concentration and Baume degree of the liquid.


Product features:

◇ (Solid) Directly read the density and volume of any shape density > 1 or < 1 solid block, particle, floating body.

◇ With temperature compensation setting, solution compensation setting function, more user-friendly operation.

◇ The density measuring table is integrated by injection molding, which is convenient and quick to install, and the use time is longer.

◇ Adopt one-piece anti-corrosion large sink design to reduce the error caused by the buoyancy of the hanging railing line.

◇ (Liquid) Direct reading of any solution can be quickly measured, and the operation is in place in one step, which is convenient for multiple continuous rapid tests.

◇ Convenient sampling, only 50CC of the tested sample, digital display, high measurement accuracy, simple operation, stable and durable.

◇ The measuring cup is easy to clean, is not restricted by the small diameter of the pycnometer, and can be reused.

◇ It has the function of upper and lower density limits, which can determine whether the specific gravity of the test object is qualified or not, and is equipped with a buzzer device.

◇ SJ series adopts German HBM sensor.

◇ Standard RS232 external interface.

◇ Large-screen LCD display.

◇ It comes with a battery, which is more suitable for on-site testing.

◇ With its own solid-liquid components, solid-liquid switching at any time, making measurement more convenient.

Product parameters:

Type   number

SJ-300GY

SJ-600GY

SJ-300GYT

SJ-120GYT

Operation method

Key operation

Weighing weight (g)

0.01-300g

0.01-600g

0.005-300g

0.001-120g

Density accuracy (g/cm3)

0.001g/cm3

0.0001g/cm3

Test time

About 5S

Type of test

Irregular solid materials can be measured, such as: block, particle, film, floating body, etc.

The density of various liquids such as chemical solutions, chemical additives, modern energy, pharmaceuticals, paints, asphalt, edible oil, etc.

Compensation settings

Water temperature setting, measuring medium density, waterproof treatment medium setting, density upper and lower limit setting

Density range

Density >1, <1 solids can be tested

Display value

Non-absorbent products: density, volume, volume percentage

Non-absorbent products: apparent density, bulk density, wet density, total porosity, effective porosity,

Density, Baume Degree, Relative Density, Concentration, Average Density, Lowest Density, Lowest Density

Measurement principle

Archimedes principle buoyancy method

Parameter setting

Liquid density setting, density upper and lower limit setting correction method: single-key correction, automatic detection

Output port

RS-232 interface, can connect to printer or PC

Sensor

German HBM

Power supply

Built-in battery

Screen display

Large screen blue backlight display


Contact
Tel:
Quick Links
Copyright © Shanghai Shuju Instrument Technology Co., Ltd.
Disclaimer: Part of the information on this site comes from the Internet, if there is any infringement,
please contact customer service in time, we will deal with it as soon as possible
WeChat
15601600739
Powered by Feedback Manage